Kyle
cca03cd2f3
Standard parts (partsLibrary.js) - ACDC TXL palette: 15 solids plus the 16 stocked stripe combinations - 29 wire functions fix colour, stripe and gauge per signal, so a wire drawn from a given pin comes out identical on every build - 16 pre-labelled parts: Skudak VCU (GRAY/BLACK), openinverter LDU 23-pin, Dilong OBC/DCDC, BMW pedal, Honeywell CSSV1500, Bender ISO175, Bosch iBooster, Prius EPS, Volvo PS pump, cluster, DNR switch, 32-way enclosure bulkhead, contactors, VW MEB BMS - OEM colours override the in-house standard where we splice into a factory loom (VW MEB LV connector, recovered from the VW bms diagram) - Brown is ground, matching the MEB loom and European practice; orange is reserved for AC mains and OEM high-voltage runs Fuse box configurator (pdmLibrary.js) - GEP FRH-A12/A24 and the 48-way PDM as 280-footprint cavity grids - Place, drag and rotate fuses, relays, diodes, breakers and bus bars - Bus bars occupy their own collision layer and feed the blades they cross, suppressing those inputs so one wire supplies the run - Cavity capacity is tracked; Apply is blocked while a placement overlaps or overhangs - Naming a circuit renames its pins: "VCU" gives "VCU in" / "VCU out" Theming (theme.js) - Light and dark modes; canvas background, grid dots, part fill and part outline are configurable and persisted - CSS converted to custom properties with property-aware light-mode pairs, since a colour used as text and as a surface must flip differently; no rule falls below 3:1 contrast in either theme - Canvas devices, pins, labels, cable rows and the harness view are themed too, since Konva bakes colours in at draw time and cannot read CSS variables Also - Pass-through bulkheads: one device covering both connector faces, with a single centred label per circuit - Pin labels scale with the device font instead of a fixed 8px - Keyboard handling is modal-scoped, so Delete no longer removes the canvas device while the fuse box editor is open Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
307 lines
20 KiB
JavaScript
307 lines
20 KiB
JavaScript
// Automotive / EV connector library
|
||
// Each entry: { id, name, manufacturer, partNumber, pinCount, pinLabels?, description }
|
||
|
||
const CONNECTOR_LIBRARY = {
|
||
"Deutsch DT": [
|
||
{ id: "dt-2p", name: "DT04-2P", manufacturer: "TE Connectivity", partNumber: "DT04-2P-P012", pinCount: 2, description: "2-pin weatherproof plug, 20–14 AWG" },
|
||
{ id: "dt-3p", name: "DT04-3P", manufacturer: "TE Connectivity", partNumber: "DT04-3P-P012", pinCount: 3, description: "3-pin weatherproof plug, 20–14 AWG" },
|
||
{ id: "dt-4p", name: "DT04-4P", manufacturer: "TE Connectivity", partNumber: "DT04-4P-P012", pinCount: 4, description: "4-pin weatherproof plug, 20–14 AWG" },
|
||
{ id: "dt-6p", name: "DT04-6P", manufacturer: "TE Connectivity", partNumber: "DT04-6P-P012", pinCount: 6, description: "6-pin weatherproof plug, 20–14 AWG" },
|
||
{ id: "dt-8p", name: "DT04-8P", manufacturer: "TE Connectivity", partNumber: "DT04-8P-P012", pinCount: 8, description: "8-pin weatherproof plug, 20–14 AWG" },
|
||
{ id: "dt-12p", name: "DT04-12P", manufacturer: "TE Connectivity", partNumber: "DT04-12P-P014", pinCount: 12, description: "12-pin weatherproof plug, 20–14 AWG" },
|
||
{ id: "dt-2s", name: "DT06-2S", manufacturer: "TE Connectivity", partNumber: "DT06-2S", pinCount: 2, description: "2-pin weatherproof socket (receptacle)" },
|
||
{ id: "dt-4s", name: "DT06-4S", manufacturer: "TE Connectivity", partNumber: "DT06-4S", pinCount: 4, description: "4-pin weatherproof socket (receptacle)" },
|
||
{ id: "dt-6s", name: "DT06-6S", manufacturer: "TE Connectivity", partNumber: "DT06-6S", pinCount: 6, description: "6-pin weatherproof socket (receptacle)" },
|
||
{ id: "dt-8s", name: "DT06-8S", manufacturer: "TE Connectivity", partNumber: "DT06-8S", pinCount: 8, description: "8-pin weatherproof socket (receptacle)" },
|
||
],
|
||
"Deutsch DTM (Miniature)": [
|
||
{ id: "dtm-2p", name: "DTM04-2P", manufacturer: "TE Connectivity", partNumber: "DTM04-2P", pinCount: 2, description: "2-pin miniature weatherproof, 24–20 AWG" },
|
||
{ id: "dtm-3p", name: "DTM04-3P", manufacturer: "TE Connectivity", partNumber: "DTM04-3P", pinCount: 3, description: "3-pin miniature weatherproof" },
|
||
{ id: "dtm-4p", name: "DTM04-4P", manufacturer: "TE Connectivity", partNumber: "DTM04-4P", pinCount: 4, description: "4-pin miniature weatherproof" },
|
||
{ id: "dtm-6p", name: "DTM04-6P", manufacturer: "TE Connectivity", partNumber: "DTM04-6P", pinCount: 6, description: "6-pin miniature weatherproof" },
|
||
{ id: "dtm-8p", name: "DTM04-8P", manufacturer: "TE Connectivity", partNumber: "DTM04-8P", pinCount: 8, description: "8-pin miniature weatherproof" },
|
||
{ id: "dtm-2s", name: "DTM06-2S", manufacturer: "TE Connectivity", partNumber: "DTM06-2S", pinCount: 2, description: "2-pin miniature socket" },
|
||
{ id: "dtm-4s", name: "DTM06-4S", manufacturer: "TE Connectivity", partNumber: "DTM06-4S", pinCount: 4, description: "4-pin miniature socket" },
|
||
],
|
||
"Deutsch DTP (High Current)": [
|
||
{ id: "dtp-2p", name: "DTP04-2P", manufacturer: "TE Connectivity", partNumber: "DTP04-2P-E003", pinCount: 2, description: "2-pin high current plug, up to 40A per pin, 12–10 AWG", pinLabels: ["+", "−"] },
|
||
{ id: "dtp-4p", name: "DTP04-4P", manufacturer: "TE Connectivity", partNumber: "DTP04-4P-E003", pinCount: 4, description: "4-pin high current plug, up to 40A per pin" },
|
||
{ id: "dtp-2s", name: "DTP06-2S", manufacturer: "TE Connectivity", partNumber: "DTP06-2S-E003", pinCount: 2, description: "2-pin high current socket" },
|
||
{ id: "dtp-4s", name: "DTP06-4S", manufacturer: "TE Connectivity", partNumber: "DTP06-4S-E003", pinCount: 4, description: "4-pin high current socket" },
|
||
],
|
||
"Deutsch HD (Heavy Duty)": [
|
||
{ id: "hd-9", name: "HD30-9", manufacturer: "TE Connectivity", partNumber: "HD30-9-1939P", pinCount: 9, description: "9-pin heavy duty, SAE J1939 CAN" },
|
||
{ id: "hd-18", name: "HD30-18", manufacturer: "TE Connectivity", partNumber: "HD30-18-14P", pinCount: 18, description: "18-pin heavy duty" },
|
||
{ id: "hd-24", name: "HD30-24", manufacturer: "TE Connectivity", partNumber: "HD30-24-14P", pinCount: 24, description: "24-pin heavy duty" },
|
||
],
|
||
"Anderson Powerpole": [
|
||
{ id: "ap-pp15", name: "PP15/30", manufacturer: "Anderson Power", partNumber: "1327G6", pinCount: 2, description: "15/30 A Powerpole, 15–12 AWG", pinLabels: ["+", "−"] },
|
||
{ id: "ap-pp45", name: "PP45", manufacturer: "Anderson Power", partNumber: "1338G6", pinCount: 2, description: "45 A Powerpole, 12–10 AWG", pinLabels: ["+", "−"] },
|
||
{ id: "ap-pp75", name: "PP75", manufacturer: "Anderson Power", partNumber: "5913G2", pinCount: 2, description: "75 A Powerpole, 8–4 AWG", pinLabels: ["+", "−"] },
|
||
{ id: "ap-sb50", name: "SB 50", manufacturer: "Anderson Power", partNumber: "6319G1", pinCount: 2, description: "50 A SB connector, 6–2 AWG", pinLabels: ["+", "−"] },
|
||
{ id: "ap-sb120", name: "SB 120", manufacturer: "Anderson Power", partNumber: "6352G1", pinCount: 2, description: "120 A SB connector, 2–4/0 AWG", pinLabels: ["+", "−"] },
|
||
{ id: "ap-sb175", name: "SB 175", manufacturer: "Anderson Power", partNumber: "6321G1", pinCount: 2, description: "175 A SB connector, 2–4/0 AWG", pinLabels: ["+", "−"] },
|
||
{ id: "ap-sb350", name: "SB 350", manufacturer: "Anderson Power", partNumber: "6348G1", pinCount: 2, description: "350 A SB connector, 4/0 AWG", pinLabels: ["+", "−"] },
|
||
],
|
||
"Molex Micro-Fit 3.0": [
|
||
{ id: "mf-2", name: "Micro-Fit 2-pin", manufacturer: "Molex", partNumber: "43045-0200", pinCount: 2, description: "600 V, 5 A, 3.0 mm pitch" },
|
||
{ id: "mf-4", name: "Micro-Fit 4-pin", manufacturer: "Molex", partNumber: "43045-0400", pinCount: 4, description: "600 V, 5 A" },
|
||
{ id: "mf-6", name: "Micro-Fit 6-pin", manufacturer: "Molex", partNumber: "43045-0600", pinCount: 6, description: "600 V, 5 A" },
|
||
{ id: "mf-8", name: "Micro-Fit 8-pin", manufacturer: "Molex", partNumber: "43045-0800", pinCount: 8, description: "600 V, 5 A" },
|
||
{ id: "mf-10", name: "Micro-Fit 10-pin", manufacturer: "Molex", partNumber: "43045-1000", pinCount: 10, description: "600 V, 5 A" },
|
||
{ id: "mf-12", name: "Micro-Fit 12-pin", manufacturer: "Molex", partNumber: "43045-1200", pinCount: 12, description: "600 V, 5 A" },
|
||
],
|
||
"Molex Mini-Fit Jr.": [
|
||
{ id: "mfj-2", name: "Mini-Fit Jr. 2-pin", manufacturer: "Molex", partNumber: "39012020", pinCount: 2, description: "600 V, 9 A, 4.20 mm pitch" },
|
||
{ id: "mfj-4", name: "Mini-Fit Jr. 4-pin", manufacturer: "Molex", partNumber: "39012040", pinCount: 4, description: "600 V, 9 A" },
|
||
{ id: "mfj-6", name: "Mini-Fit Jr. 6-pin", manufacturer: "Molex", partNumber: "39012060", pinCount: 6, description: "600 V, 9 A" },
|
||
{ id: "mfj-8", name: "Mini-Fit Jr. 8-pin", manufacturer: "Molex", partNumber: "39012080", pinCount: 8, description: "600 V, 9 A" },
|
||
{ id: "mfj-12", name: "Mini-Fit Jr. 12-pin", manufacturer: "Molex", partNumber: "39012120", pinCount: 12, description: "600 V, 9 A" },
|
||
],
|
||
"Molex MX150 (Automotive)": [
|
||
{ id: "mx-2", name: "MX150 2-pin", manufacturer: "Molex", partNumber: "33472-0201", pinCount: 2, description: "Sealed automotive, 600 V, 13 A" },
|
||
{ id: "mx-4", name: "MX150 4-pin", manufacturer: "Molex", partNumber: "33472-0401", pinCount: 4, description: "Sealed automotive" },
|
||
{ id: "mx-6", name: "MX150 6-pin", manufacturer: "Molex", partNumber: "33472-0601", pinCount: 6, description: "Sealed automotive" },
|
||
{ id: "mx-8", name: "MX150 8-pin", manufacturer: "Molex", partNumber: "33472-0801", pinCount: 8, description: "Sealed automotive" },
|
||
],
|
||
"TE Superseal 1.5 mm (IP67)": [
|
||
{ id: "ss-1", name: "Superseal 1-pin", manufacturer: "TE Connectivity", partNumber: "1-967616-1", pinCount: 1, description: "IP67, 0.5–1.0 mm², 8.5 A" },
|
||
{ id: "ss-2", name: "Superseal 2-pin", manufacturer: "TE Connectivity", partNumber: "1-967616-2", pinCount: 2, description: "IP67, 0.5–1.0 mm²" },
|
||
{ id: "ss-3", name: "Superseal 3-pin", manufacturer: "TE Connectivity", partNumber: "1-967616-3", pinCount: 3, description: "IP67, 0.5–1.0 mm²" },
|
||
{ id: "ss-4", name: "Superseal 4-pin", manufacturer: "TE Connectivity", partNumber: "1-967616-4", pinCount: 4, description: "IP67, 0.5–1.0 mm²" },
|
||
{ id: "ss-6", name: "Superseal 6-pin", manufacturer: "TE Connectivity", partNumber: "1-967616-6", pinCount: 6, description: "IP67, 0.5–1.0 mm²" },
|
||
],
|
||
"Delphi / Aptiv Weatherpack": [
|
||
{ id: "wp-1", name: "Weatherpack 1-pin", manufacturer: "Aptiv (Delphi)", partNumber: "12015793", pinCount: 1, description: "GT series, 100 °C rated, 20–18 AWG" },
|
||
{ id: "wp-2", name: "Weatherpack 2-pin", manufacturer: "Aptiv (Delphi)", partNumber: "12010299", pinCount: 2, description: "GT series, 100 °C rated" },
|
||
{ id: "wp-3", name: "Weatherpack 3-pin", manufacturer: "Aptiv (Delphi)", partNumber: "12010325", pinCount: 3, description: "GT series" },
|
||
{ id: "wp-4", name: "Weatherpack 4-pin", manufacturer: "Aptiv (Delphi)", partNumber: "12010298", pinCount: 4, description: "GT series" },
|
||
{ id: "wp-6", name: "Weatherpack 6-pin", manufacturer: "Aptiv (Delphi)", partNumber: "12010973", pinCount: 6, description: "GT series" },
|
||
],
|
||
"Delphi Metripack": [
|
||
{ id: "mp150-2", name: "Metripack 150 2-pin", manufacturer: "Aptiv (Delphi)", partNumber: "12162825", pinCount: 2, description: "Metripack 150, sealed" },
|
||
{ id: "mp150-3", name: "Metripack 150 3-pin", manufacturer: "Aptiv (Delphi)", partNumber: "12162193", pinCount: 3, description: "Metripack 150, sealed" },
|
||
{ id: "mp280-2", name: "Metripack 280 2-pin", manufacturer: "Aptiv (Delphi)", partNumber: "12010973", pinCount: 2, description: "Metripack 280 (larger terminal, higher current)" },
|
||
{ id: "mp630-1", name: "Metripack 630 1-pin", manufacturer: "Aptiv (Delphi)", partNumber: "12110293", pinCount: 1, description: "Metripack 630, high current single contact" },
|
||
],
|
||
"Tesla (Proprietary / Approximate)": [
|
||
{
|
||
id: "tesla-hv23", name: "HV Battery 23-pin", manufacturer: "Tesla", partNumber: "Tesla OEM",
|
||
pinCount: 23, description: "Model S/X HV battery main connector (proprietary pinout — verify with service manual)",
|
||
pinLabels: ["HV+","HV+","HV−","HV−","SH","SH","HVIL+","HVIL−","CAN H","CAN L","CANH2","CANL2","12V","GND","GND","TP","TP","TP","TP","TP","TP","TP","TP"],
|
||
},
|
||
{
|
||
id: "tesla-hvil2", name: "HV Interlock 2-pin", manufacturer: "Tesla", partNumber: "Tesla OEM",
|
||
pinCount: 2, description: "High voltage interlock loop", pinLabels: ["HVIL+", "HVIL−"],
|
||
},
|
||
{
|
||
id: "tesla-charge-m3", name: "Charge Port (Model 3/Y)", manufacturer: "Tesla", partNumber: "Tesla OEM",
|
||
pinCount: 5, description: "AC charge port, Model 3 / Y (proprietary, similar to J1772)", pinLabels: ["L1","L2/N","GND","PP","CP"],
|
||
},
|
||
{
|
||
id: "tesla-can4", name: "CAN Bus 4-pin", manufacturer: "Tesla", partNumber: "Tesla OEM",
|
||
pinCount: 4, description: "Typical CAN bus connector (varies by model/year)", pinLabels: ["CAN H","CAN L","GND","12V"],
|
||
},
|
||
{
|
||
id: "tesla-hv2", name: "HV 2-pin (Phase)", manufacturer: "Tesla", partNumber: "Tesla OEM",
|
||
pinCount: 2, description: "HV 2-pin power connector (motor/inverter phase, approximate)", pinLabels: ["+","−"],
|
||
},
|
||
],
|
||
"EV Charging Standards": [
|
||
{
|
||
id: "ev-j1772", name: "SAE J1772 Type 1", manufacturer: "Standard", partNumber: "SAE J1772",
|
||
pinCount: 5, description: "AC Level 1/2 charging — North America", pinLabels: ["L1","N","GND","PP","CP"],
|
||
},
|
||
{
|
||
id: "ev-type2", name: "IEC 62196 Type 2", manufacturer: "Standard", partNumber: "IEC 62196-2",
|
||
pinCount: 7, description: "AC charging — Europe / international", pinLabels: ["L1","L2","L3","N","GND","PP","CP"],
|
||
},
|
||
{
|
||
id: "ev-chademo", name: "CHAdeMO DC Fast", manufacturer: "Standard", partNumber: "CHAdeMO",
|
||
pinCount: 10, description: "DC fast charge (up to 400 A / 500 V)", pinLabels: ["DC+","DC−","GND","CAN H","CAN L","Charge enable","Car ready","Charge stop","FG","Shield"],
|
||
},
|
||
{
|
||
id: "ev-ccs1", name: "CCS Combo 1 (DC)", manufacturer: "Standard", partNumber: "SAE J1772 CCS",
|
||
pinCount: 2, description: "CCS DC fast charge pins (2 large pins below J1772)", pinLabels: ["DC+","DC−"],
|
||
},
|
||
],
|
||
"CAN / Network": [
|
||
{ id: "can-dt2", name: "CAN Deutsch 2-pin", manufacturer: "TE Connectivity", partNumber: "DT04-2P", pinCount: 2, description: "Deutsch DT 2-pin for CAN bus", pinLabels: ["CAN H","CAN L"] },
|
||
{ id: "can-j1939", name: "SAE J1939 9-pin", manufacturer: "Amphenol", partNumber: "HD10-9-1939P", pinCount: 9, description: "J1939 CAN heavy-vehicle datalink", pinLabels: ["−Battery","+Battery","GND","CAN H","Shield","GND","CAN L","NC","NC"] },
|
||
{ id: "can-obd2", name: "OBD-II 16-pin", manufacturer: "Standard", partNumber: "SAE J1962", pinCount: 16, description: "On-board diagnostics port", pinLabels: ["Mfr","Mfr","GND","Mfr","Sig GND","CAN H","K-Line","Mfr","Bat+","Mfr","Mfr","Mfr","Mfr","CAN L","L-Line","OBD+"] },
|
||
],
|
||
"Deutsch DRC (Round)": [
|
||
{
|
||
id: "drc-30p", name: "DRC04-30P", manufacturer: "TE Connectivity",
|
||
partNumber: "DRC04-30P-A191", pinCount: 30, shape: "circular",
|
||
pinRings: [14, 10, 6],
|
||
description: "30-pin circular environmental plug (pin contacts), IP67, 12–20 AWG",
|
||
},
|
||
{
|
||
id: "drc-30s", name: "DRC06-30S", manufacturer: "TE Connectivity",
|
||
partNumber: "DRC06-30S-A191", pinCount: 30, shape: "circular",
|
||
pinRings: [14, 10, 6],
|
||
description: "30-pin circular environmental socket (receptacle), IP67, 12–20 AWG",
|
||
},
|
||
],
|
||
"General Automotive / EV": [
|
||
{ id: "ga-motor3", name: "Motor Phase 3-pin", manufacturer: "varies", partNumber: "varies", pinCount: 3, description: "3-phase motor connections", pinLabels: ["U","V","W"] },
|
||
{ id: "ga-res2", name: "Resolver 2-pin", manufacturer: "varies", partNumber: "varies", pinCount: 2, description: "Motor resolver position sensor", pinLabels: ["SIN","COS"] },
|
||
{ id: "ga-therm2", name: "Temperature Sensor 2-pin",manufacturer: "varies", partNumber: "varies", pinCount: 2, description: "NTC/PTC thermistor", pinLabels: ["SIG","GND"] },
|
||
{ id: "ga-hall3", name: "Hall Sensor 3-pin", manufacturer: "varies", partNumber: "varies", pinCount: 3, description: "Hall effect position sensor", pinLabels: ["VCC","GND","SIG"] },
|
||
{ id: "ga-batt2", name: "12 V Battery 2-pin", manufacturer: "varies", partNumber: "varies", pinCount: 2, description: "12 V battery / accessory supply", pinLabels: ["+12V","GND"] },
|
||
{ id: "ga-ctrlr4", name: "Controller 4-pin", manufacturer: "varies", partNumber: "varies", pinCount: 4, description: "Generic 4-pin controller interface", pinLabels: ["VCC","GND","SIG","EN"] },
|
||
{ id: "ga-fuse2", name: "Fuse Holder 2-pin", manufacturer: "varies", partNumber: "varies", pinCount: 2, description: "Inline fuse holder connections", pinLabels: ["IN","OUT"] },
|
||
{ id: "ga-relay5", name: "Relay 5-pin (SPDT)", manufacturer: "varies", partNumber: "varies", pinCount: 5, description: "SPDT automotive relay", pinLabels: ["85","86","30","87","87a"] },
|
||
],
|
||
};
|
||
|
||
// Build a flat lookup map for quick access by id
|
||
const _CONN_BY_ID = {};
|
||
for (const conns of Object.values(CONNECTOR_LIBRARY)) {
|
||
for (const c of conns) { _CONN_BY_ID[c.id] = c; }
|
||
}
|
||
|
||
function getConnectorById(id) { return _CONN_BY_ID[id] || null; }
|
||
|
||
function connectorToDevice(connId, diagramId) {
|
||
const conn = getConnectorById(connId);
|
||
if (!conn) return null;
|
||
|
||
const pinCount = conn.pinCount || 2;
|
||
|
||
if (conn.shape === "circular") {
|
||
const size = 140;
|
||
const cx = size / 2, cy = size / 2;
|
||
const pinR = size * 0.471; // pins outside the body circle (body uses 0.386 ratio)
|
||
|
||
const pins = Array.from({ length: pinCount }, (_, i) => {
|
||
const angle = -Math.PI / 2 + (2 * Math.PI * i / pinCount);
|
||
const x = cx + pinR * Math.cos(angle);
|
||
const y = cy + pinR * Math.sin(angle);
|
||
let side;
|
||
if (angle >= -3 * Math.PI / 4 && angle < -Math.PI / 4) side = "top";
|
||
else if (angle >= -Math.PI / 4 && angle < Math.PI / 4) side = "right";
|
||
else if (angle >= Math.PI / 4 && angle < 3 * Math.PI / 4) side = "bottom";
|
||
else side = "left";
|
||
return {
|
||
id: `pin_${i + 1}`,
|
||
name: conn.pinLabels ? (conn.pinLabels[i] || String(i + 1)) : String(i + 1),
|
||
side,
|
||
x_offset: Math.round(x * 10) / 10,
|
||
y_offset: Math.round(y * 10) / 10,
|
||
};
|
||
});
|
||
|
||
return {
|
||
diagram_id: diagramId,
|
||
device_type: "connector",
|
||
label: conn.name,
|
||
reference: "",
|
||
x: 200, y: 200,
|
||
width: size, height: size,
|
||
properties: {
|
||
pinCount,
|
||
shape: "circular",
|
||
pinRings: conn.pinRings || [],
|
||
orientation: "right",
|
||
partNumber: conn.partNumber || "",
|
||
manufacturer: conn.manufacturer || "",
|
||
connectorLibraryId: connId,
|
||
},
|
||
pins,
|
||
};
|
||
}
|
||
|
||
// Standard rectangular connector.
|
||
// Parts carrying pinSpecs (see partsLibrary.js) get their standard wire
|
||
// function stamped onto each pin, so wires drawn off them always come out the
|
||
// same colour, stripe and gauge.
|
||
const specs = conn.pinSpecs || null;
|
||
|
||
// Pass-through parts (bulkheads) present both faces of the same connector as
|
||
// one device: every circuit gets an IN pin on the left and an OUT pin on the
|
||
// right at the same height, sharing a single centred label. Wiring both sides
|
||
// of a bulkhead then needs one device, not a mated pair.
|
||
if (conn.passThrough) {
|
||
const w = 240;
|
||
const h = Math.max(60, pinCount * 18 + 24);
|
||
const pins = [];
|
||
(specs || Array.from({ length: pinCount })).forEach((spec, i) => {
|
||
const y = ((i + 1) / (pinCount + 1)) * h;
|
||
const base = {
|
||
name: spec ? spec.name : String(i + 1),
|
||
pin_number: spec ? spec.pin : String(i + 1),
|
||
wire_fn: spec ? spec.fn : null,
|
||
wire_oem: spec && spec.oem ? spec.oem : null,
|
||
note: spec ? spec.note : "",
|
||
};
|
||
pins.push({ ...base, id: `pin_${i + 1}_in`, side: "left", x_offset: 0, y_offset: y, center_label: true });
|
||
pins.push({ ...base, id: `pin_${i + 1}_out`, side: "right", x_offset: w, y_offset: y, hide_label: true });
|
||
});
|
||
return {
|
||
diagram_id: diagramId,
|
||
device_type: "connector",
|
||
label: conn.name,
|
||
reference: "",
|
||
x: 200, y: 200,
|
||
width: w, height: h,
|
||
properties: {
|
||
pinCount,
|
||
orientation: "right",
|
||
passThrough: true,
|
||
partNumber: conn.partNumber || "",
|
||
manufacturer: conn.manufacturer || "",
|
||
connectorLibraryId: connId,
|
||
standardPart: !!specs,
|
||
verifyPinout: !!conn.verify,
|
||
},
|
||
pins,
|
||
};
|
||
}
|
||
|
||
// Wide parts get two columns so a 20- or 32-way body stays readable.
|
||
const split = pinCount > 12;
|
||
const perSide = split ? Math.ceil(pinCount / 2) : pinCount;
|
||
const w = split ? 200 : 120;
|
||
const h = Math.max(60, perSide * 18 + 20);
|
||
|
||
const pins = Array.from({ length: pinCount }, (_, i) => {
|
||
const spec = specs ? specs[i] : null;
|
||
const onRight = !split || i >= perSide;
|
||
const idx = onRight && split ? i - perSide : i;
|
||
const count = onRight && split ? pinCount - perSide : perSide;
|
||
return {
|
||
id: `pin_${i + 1}`,
|
||
name: spec ? spec.name : (conn.pinLabels ? (conn.pinLabels[i] || String(i + 1)) : String(i + 1)),
|
||
side: onRight ? "right" : "left",
|
||
x_offset: onRight ? w : 0,
|
||
y_offset: ((idx + 1) / (count + 1)) * h,
|
||
// Standard-parts metadata — consumed by createWire() and the props panel.
|
||
pin_number: spec ? spec.pin : String(i + 1),
|
||
wire_fn: spec ? spec.fn : null,
|
||
wire_oem: spec && spec.oem ? spec.oem : null,
|
||
note: spec ? spec.note : "",
|
||
};
|
||
});
|
||
|
||
return {
|
||
diagram_id: diagramId,
|
||
device_type: "connector",
|
||
label: conn.name,
|
||
reference: "",
|
||
x: 200, y: 200,
|
||
width: w, height: h,
|
||
properties: {
|
||
pinCount,
|
||
orientation: "right",
|
||
partNumber: conn.partNumber || "",
|
||
manufacturer: conn.manufacturer || "",
|
||
connectorLibraryId: connId,
|
||
standardPart: !!specs,
|
||
verifyPinout: !!conn.verify,
|
||
},
|
||
pins,
|
||
};
|
||
}
|