The Tesla OBC hardware already publishes 9 temperature probes (3
modules × {tmp1, tmp2, tmpin}) on CAN 0x237/0x239/0x23B which the
teslacharger receives as c[123]tmp[12,in]. Until now none of these
were forwarded downstream — the Polarity VCU's STATUS_SCREEN OBC-temp
and DCDC-temp fields rendered 0 °C on OI-OBC cars.
This commit:
- Adds Param::tmpobcmax — derived value computed each Ms100Task tick
as the max across the 9 probes, skipping any that read -40 °C
(sensor absent / module not present).
- Maps it to 0x211 byte 7 (previously reserved, the last unused byte
of the 7-byte frame). Wire encoding uses the Tesla OBC convention
of offset 40 (wire = °C + 40), matching c[123]tmp* upstream so
receivers can decode with the same formula.
- Bumps VERSTR to -S5 so the right firmware is visually confirmable
in the OpenInverter web UI.
The new byte is purely additive — existing 0x211 consumers that read
only bytes 0-6 continue to work unchanged.
The Polarity VCU's 0x211 RX handler grows a corresponding decode +
display path in a paired stm32-hal-vcu commit.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Bastian de Byl