Bastian de Byl
7de46b8160
Bench capture on the green car showed a non-Polarity module also broadcasting at 0x210 (DLC=8 frame with mostly-zero payload, byte 5 = 0x85 static — likely a Tesla OEM DI module). Even after a clean reflash + 'can c' to clear persisted maps, the rogue 0x210 frame keeps appearing on the wire, racing our intended frame and intermittently corrupting the VCU's read. Confirmed via 'can p' on the OBC that this firmware's CanMap has exactly one 0x210 entry with the 5 expected fields — the conflict is external. Moves all five AddSends to 0x211, an adjacent free ID. The VCU's CHARGER_CAN_ID_OI_OBC_AUX constant is updated to match in a paired stm32-hal-vcu PR. Same 7-byte expanded layout (state/udc/idc/uaux@5/soc), same 100ms cadence — only the arbitration ID changes. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
stm32-template
This project can be a starting point to your own STM32 project. It contains facilities that make software development easier and ensures compatibility with the esp8266 web interface.
It provides
- Mostly object oriented syntax
- A simple, hardware based scheduler for recurring tasks
- Analog input management, fully independent with DMA
- Digital I/O management
- CAN library supporting up to 2 CAN interfaces
- hardware filter support
- No limitation on number of messages
- Automatic mapping from/to parameter module
- CAN Open SDO support
- Fully interrupt driven
- Error memory
- ligthweight fixed point arithmetic
- string functions to be independent of stdlib
- Parameter module that interfaces to esp8266 web GUI
- Saving parameters to flash
- Serial terminal with custom commands and DMA transfer
- Mathematical functions (sin/cos, arctan, square root)
- PI controller class
- Functions for field oriented control
OTA (over the air upgrade)
The firmware is linked to leave the 4 kb of flash unused. Those 4 kb are reserved for the bootloader that you can find here: https://github.com/jsphuebner/tumanako-inverter-fw-bootloader When flashing your device for the first time you must first flash that bootloader. After that you can use the ESP8266 module and its web interface to upload your actual application firmware. The web interface is here: https://github.com/jsphuebner/esp8266-web-interface
Compiling
You will need the arm-none-eabi toolchain: https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads On Ubuntu type
sudo apt-get install git gcc-arm-none-eabi
The only external depedencies are libopencm3 and libopeninv. You can download and build these dependencies by typing
make get-deps
Now you can compile stm32- by typing
make
And upload it to your board using a JTAG/SWD adapter, the updater.py script or the esp8266 web interface.
Editing
The repository provides a project file for Code::Blocks, a rather leightweight IDE for cpp code editing. For building though, it just executes the above command. Its build system is not actually used. Consequently you can use your favority IDE or editor for editing files.
Adding classes or modules
As your firmware grows you probably want to add classes. To do so, put the header file in include/ and the source file in src/ . Then add your module to the object list in Makefile that starts in line 43 with .o extension. So if your files are called "mymodule.cpp" and "mymodule.h" you add "mymodule.o" to the list.
When changing a header file the build system doesn't always detect this, so you have to "make clean" and then make. This is especially important when editing the "*_prj.h" files.